Van Voorden diamond saw blades

Van Voorden diamond saw blades

Saw diameters and bore sizes.
Find the right saw blade fitting to your Van Voorden diamond saw machine.

Whatever machinery you have, mount a compatible blade measuring the full size. Substituting a close enough undersized diameter may be possible, but not ideal.

Van Voorden

modelnumber size
115 x 22,2 mm
ES-1400, Tronic-125
125 x 22,2 mm
130 x 22,2 mm
ES-1500, Proton-45
150 x 22,2 mm
180 x 22,2 mm
180 x 25,4 mm
200 x 25,4 mm
Alumini-60, Lineal
230 x 25,4 mm
250 x 25,4 mm
300 x 25,4 mm
Tandem 2100w
Tandem-prcd 2100w
300 x 30 mm
Centro - sawing in angle of 45°
350 x 25,4 mm
300 x 25,4 mm
Aluma65, Aluma85
Aluma100-2,2kw d350
Crono, Disco, Unica
Reno-60, 80, 130, 150, 200
350 x 25,4 mm
Aluma-100 3kw d400
Profa 3000w
Roma kb 2,2kw/3kw d400
400 x 25,4 mm
Roma kb 3kw d450
450 x 25,4 mm
Mondo 120, Mondo 150
450 x 40 mm
500 x 25,4 mm
Doblo 4kw d600
600 x 30 mm
Combo 4kw d650
650 x 40 mm
Monza 5,5kw d650
700 x 60 mm

Always work with sharp tools for the best result and safety. Wear safety glasses, work gloves and ear protection if possible, when you work with machines.

The historical relations with our machinery works and manufacturers of diamond tools underwrite our expertise and know-how in diamond technology. Our company has an engineering base on the introduction, promotion and acceptation in the use of diamond tools in the construction industry for years now.

van voorden diamond saw blades

Handelmaatschappij Van Voorden b.v.
Pauvreweg 22
4879 NA Etten-Leur

Postbus 321
4870 AH Etten-Leur

The Netherlands

website: www.vanvoorden.com

Van Voorden Wall Chaser
Van Voorden diamond tools


Circular saw blades have different sizes from a few inches to several feet across. Diameter is the span from one edge of the circle to the other measured along a center line. The radius is half that; it is the span from the center to the edge. A saw doesn't have the capacity to cut that deep, though. Maximum depth of cut is less than the radius. It cuts no deeper than 1/3 of its diameter. A 10" saw cuts about 3" deep at maximum capacity, and usually less. A big blade has greater cutting depth. Not only can a larger blade cut deeper, it also has a larger circumference, or the measurement around the rim. A longer cutting length around the circumference makes space for more tips overall. For this reason, bigger blades have longer endurance. Small blades have less circumference circling the rim, which explains how fast they get used up. A big one might last the equivalent of two smaller ones. However, large sizes won't necessarily allow faster feed; coarseness determines that.

Copyright © 2019 -
SuRish int. - all rights reserved