Lissmac diamond saw blades

Lissmac diamond saw blades

Saw diameters and bore sizes.
Find the right saw blade fitting to your Lissmac diamond saw machine.

Whatever machinery you have, mount a compatible blade measuring the full size. Substituting a close enough undersized diameter may be possible, but not ideal.


modelnumber size
350/400 x 25,4 mm
400 x 25,4 mm
600 x 25,4 mm
700 x 60 mm
900/1000 x 60 mm
1000 x 60 mm

Always work with sharp tools for the best result and safety. Wear safety glasses, work gloves and ear protection if possible, when you work with machines.

Lissmac stands for innovation, experience and quality. We optimize our customers work with innovative solutions on a daily basis. It is our aim to always be a step ahead. And we break the mold daily to do just that. We initiate modern construction and industrial technology with our practice related new developments and have actively promoted automation. Our experience and system competence are what makes our solutions stand out.

lissmac diamond saw blades

LISSMAC Maschinenbau GmbH
Lanzstrasse 4
88410 Bad Wurzach

website: www.lissmac.com

Lissmac DTS600
Lissmac saw for stone and concrete


Circular saw blades have different sizes from a few inches to several feet across. Diameter is the span from one edge of the circle to the other measured along a center line. The radius is half that; it is the span from the center to the edge. A saw doesn't have the capacity to cut that deep, though. Maximum depth of cut is less than the radius. It cuts no deeper than 1/3 of its diameter. A 10" saw cuts about 3" deep at maximum capacity, and usually less. A big blade has greater cutting depth. Not only can a larger blade cut deeper, it also has a larger circumference, or the measurement around the rim. A longer cutting length around the circumference makes space for more tips overall. For this reason, bigger blades have longer endurance. Small blades have less circumference circling the rim, which explains how fast they get used up. A big one might last the equivalent of two smaller ones. However, large sizes won't necessarily allow faster feed; coarseness determines that.

Copyright © 2019 -
SuRish int. - all rights reserved