diamond-saw-blades

Interdynamics diamond saw blades

Interdynamics diamond saw blades

Saw diameters and bore sizes.
Find the right saw blade fitting to your Interdynamics diamond saw machine.

Whatever machinery you have, mount a compatible blade measuring the full size. Substituting a close enough undersized diameter may be possible, but not ideal.


Interdynamics

modelnumber size
Dynamic 1320
250 x 25,4 mm
MS125
125x 22,23mm
SCW125
125x 22,23mm
MS150
125x 22,23mm
TCM180
180x 22,23mm
Dynamic 680
180 x 25,4 mm
Dynamic 1000
250 x 25,4 mm
Dynamic 1320
250 x 25,4 mm
TCM350
350 x 25,4 mm
110070
350 x 30 mm


Always work with sharp tools for the best result and safety. Wear safety glasses, work gloves and ear protection if possible, when you work with machines.
diamond-blade-concrete

InterDynamics in Lelystad is trader in diamond tools for professional use such as diamond saws for use in concrete, stone and tiles.



InterDynamics diamond saw blades

InterDynamics
A.S.F Fischer BV
Lelystad
The Netherlands

website: www.interdynamics.eu


Procat-tile-saw
Interdynamics tile saw

choose region for int.traders



extra


Circular saw blades have different sizes from a few inches to several feet across. Diameter is the span from one edge of the circle to the other measured along a center line. The radius is half that; it is the span from the center to the edge. A saw doesn't have the capacity to cut that deep, though. Maximum depth of cut is less than the radius. It cuts no deeper than 1/3 of its diameter. A 10" saw cuts about 3" deep at maximum capacity, and usually less. A big blade has greater cutting depth. Not only can a larger blade cut deeper, it also has a larger circumference, or the measurement around the rim. A longer cutting length around the circumference makes space for more tips overall. For this reason, bigger blades have longer endurance. Small blades have less circumference circling the rim, which explains how fast they get used up. A big one might last the equivalent of two smaller ones. However, large sizes won't necessarily allow faster feed; coarseness determines that.

Copyright © 2019 -
SuRish int. - all rights reserved