Ulmia circular saw blades

Ulmia circular saw blades

Saw diameters and bore sizes.
Find the right saw blade fitting to your Ulmia circular saw machine.

Whatever machinery you have, mount a compatible blade measuring the full size. Substituting a close enough undersized diameter may be possible, but not ideal.


modelnumber size
190 x 16 mm
255 x 30 mm
355 x 25,4 mm

Always work with sharp tools for the best result and safety. Wear safety glasses, work gloves and ear protection if possible, when you work with machines.

Ulmia is a German company, a manufacturer of tools that is somewhat comparable to the old old Dutch brand Nooitgedacht. Workbenches, wooden hand planers (yes, still) and other hand tools are produced. A well-known piece of equipment is the crosscut saw (not electric but with manual force) with which you can miter flawlessly. It therefore costs a bit more than the cheap hardware store junk.
However, power tools such as circular saw tables, combination machines, cross-cut saws and stationary milling machines have long since been discontinued.

Ulmia woodworking machines

for contact, see website:

Ulmia circular saw 1710


Circular saw blades have different sizes from a few inches to several feet across. Diameter is the span from one edge of the circle to the other measured along a center line. The radius is half that; it is the span from the center to the edge. A saw doesn't have the capacity to cut that deep, though. Maximum depth of cut is less than the radius. It cuts no deeper than 1/3 of its diameter. A 10" saw cuts about 3" deep at maximum capacity, and usually less. A big blade has greater cutting depth. Not only can a larger blade cut deeper, it also has a larger circumference, or the measurement around the rim. A longer cutting length around the circumference makes space for more tips overall. For this reason, bigger blades have longer endurance. Small blades have less circumference circling the rim, which explains how fast they get used up. A big one might last the equivalent of two smaller ones. However, large sizes won't necessarily allow faster feed; coarseness determines that.

Copyright © 2019 -
SuRish int. - all rights reserved